Pre Stretch Film Rewinder

Pre Stretch Film Rewinder – SMC-PRE-600

The SMACHCO SMC-PRE-600 pre stretch film rewinder converts jumbo stretch film into smaller conventional or pre-stretched rolls. It combines a three-motor drive, a servo-driven winding spindle and PLC-controlled four-stage pre-stretch in one machine.

300–550 mm jumbo film width · 8–30 µm incoming film thickness · Up to 1,100 m/min line speed

طلب عرض أسعار
·
Contact Us on WhatsApp

How Pre-Stretch Film Rewinding Works

The machine unwinds film from a jumbo roll and feeds it through the pre-stretch rollers. The rollers run at different surface speeds to stretch the film lengthwise before the servo-driven spindle winds it onto the finished roll core.

In conventional mode, the machine rewinds jumbo film without applying pre-stretch. In pre-stretch mode, the operator adjusts the process settings to suit the incoming film and target roll. Both modes are available on the SMC-PRE-600.

Servo Spindle, Four-Stage Pre-Stretch and Roller Oscillation

  • Three-motor drive with a servo-driven winding spindle for controlled winding onto the finished roll core.
  • PLC-controlled four-stage pre-stretch with adjustable settings for different films and finished roll specifications.
  • Oscillating front roller to reduce film edge buildup and help limit roll telescoping.
  • Pneumatic jumbo roll lifting for loading jumbo rolls up to 70 kg.
  • Three finished roll core sizes with 38, 50 and 76 mm inner diameters.

SMC-PRE-600 Technical Specifications

المواصفات SMC-PRE-600
Machine type Pre-stretch film rewinder
Operating modes Conventional rewinding and pre-stretch rewinding
Drive configuration Three motors with a servo-driven winding spindle
Control system PLC
Pre-stretch system Four stages
Pre-stretch adjustment range 0–400%, depending on film properties
Front roller Oscillating
Incoming film thickness 8–30 µm
Jumbo film width 300–550 mm
Maximum jumbo roll outside diameter 520 mm
Maximum jumbo roll weight 70 كجم
Finished roll core inner diameters 38 / 50 / 76 mm
Maximum line speed 1,100 m/min under suitable conditions
Jumbo roll loading Pneumatic lifting
Electrical supply Three-phase, 400 V
Installed power 12 kW
Compressed air requirement 7–8 bar, 180 L/min

The maximum line speed of 1,100 m/min and maximum pre-stretch of 400% are separate catalogue limits. The factory acceptance test verifies achievable speed, pre-stretch and finished roll quality using sample film.

Factory Acceptance Testing With Your Film

Before the factory acceptance test (FAT), we agree on the incoming film, finished roll specifications, target pre-stretch, test speeds and acceptance tolerances.

  • Check jumbo roll loading, centring and core changes.
  • Run conventional and pre-stretch rewinding trials.
  • Verify the four-stage pre-stretch settings and roller oscillation.
  • Assess winding stability and finished roll quality at the agreed test settings.
  • Check the control functions, emergency stops and guard interlocks.

SMACHCO manages the technical specification, component approval, production follow-up and factory acceptance testing through one point of contact.

The technical file includes operating and maintenance instructions, electrical and pneumatic diagrams, component and spare parts lists, and the FAT protocol and results. We define on-site installation, commissioning and operator training for each project.

الأسئلة الشائعة

What is the difference between a pre stretch film rewinder and a standard stretch film rewinder?

A conventional rewinder transfers stretch film from a jumbo roll to a smaller roll. The SMC-PRE-600 adds a pre-stretch mode that stretches the film before winding it. For conventional roll production, see the SMACHCO automatic stretch film rewinder.

Can the machine reach 400% pre-stretch with every film?

Achievable pre-stretch depends on the film formulation, incoming thickness, finished roll specifications and line speed. A trial with sample film establishes the operating range for your product.

What will the finished film thickness be with 8–30 µm incoming film?

Finished thickness depends on the incoming thickness and the applied pre-stretch. Share your target thickness and finished film width so we can verify them with sample film.

Will the film keep its original width?

The film can narrow during pre-stretching. Share your target finished width so we can include the incoming jumbo width and pre-stretch setting in the test plan.

How much does a pre stretch film rewinder cost?

Pricing depends on the machine configuration, acceptance test scope, delivery location and on-site services. SMACHCO prepares a technical and commercial proposal based on your production requirements.

Request a Quote for the SMC-PRE-600

Send us your jumbo film width and thickness, target finished roll width and length, core inner diameter, required pre-stretch and delivery city.

طلب عرض أسعار
·
Discuss Your Application on WhatsApp


العلامات:

arالعربية